Ibanez JEM Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hi guys... I did a search for this and didn't find an answer..

I have this:

-Dimarzio Evolution set (bridge,middle and neck)
-Dimarzio EP1112 Multipole 5 way Switch
-Dimarzio 500K volume pot
-Gibson 500K push pull tone pot

I need a diagram for the best way to connect this all together so I was thinking about something like this:

Push Pull Down : Normal HSH configuration

Push pull Up: Try to get as close as possible to an SSS configuration ( as far as i have split humbuckers on positions 1 and 5 it's ok for me but if it's possible to have other cool combos on positions 2,3 and 4 it would be really awesome)

Thanks in Advance
 

·
Registered
Joined
·
70 Posts
the dimarzio website list loads of wiring options under the support tab.
not sure if that would give you the exact wiring you need but they do list a good few options.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Thanks for your answer... I already looked on dimarzio site and only found diagrams for either dp1112 or push pull... there's no diagram for this two together
 

·
Registered
Joined
·
70 Posts
its funny but i used to have that same setup/configuration in one of my guitars but i never wrote it down before i changed it,i do remember there were many options though using a multipole and a push/pull tone knob.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #7 ·
Thanks for your answers... right now I think I will use Tosin Abasi diagram found on Dimarzio site the only thing I don't like is the lack of a middle pickup sound on position 3
 
1 - 7 of 7 Posts
Top