Ibanez JEM Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
448 Posts
Discussion Starter · #1 ·
Picked up a 92/93 JS6 that someone sanded the finish off the back of the neck and now it looks like - BLEH!!!

Fairly comfortable with using some fine grit paper to get all the nasty grime off back to clean grain, just curious on what finish to use on the back of the neck.

Thinking of hitting Guitar Re-Ranch to get some tinted clear in a spray can - thoughts? Tung Oil the back of the neck?

Thanks,

Steve
 

·
Registered
Joined
·
2,647 Posts
if it is bare wood, you can tung oil finish it to help keep it from getting grime/finger cheese build up. I have used boiled linseed oil as well, but you want to keep the coats really thin, as the linseed oil can get tacky and turn amber with too many coats. As far as refinish goes i'd probably take it to someone who has an actual spray booth.

I saw on this form someone used simple green to clean their maple neck and fretboard. I have never tried that but have used tub'o towels to get gunk and buildup off of fretboards with great success.
 
1 - 4 of 4 Posts
Top