You mean the 2 x 12 cabinet has one 8 ohm speaker and one 16 ohm speaker? If that is the case, I would replace one speaker so both had the same impedance. Then you can set your impedance switch to the proper setting and not worry about it causing a problem with the amp.Hi,
I need a little help about a bugera 333xl
I have 212 harley Benton cab and it has 16 ohms and 8 ohms... will it work or I need to buy a new one for it?
Yes... Since the amp is not stereo, just set your impedance switch on the back of the amp to 8 ohms and plug in. Shown on page 6 of the manual:8 ohms mono / 16 ohms stereo
The amp is 200 watts and will it work with it?