Ibanez JEM Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,923 Posts
It depends on the switch itself. If it's like the switch that Dimarzio sells then you can actually just goto the Ibanez website and get the wiring diagram for an old JPM.

Essentially what you want to do is wire the pickups to the toggle switch, then from the output of the toggle switch to the volume and then output jack. It's pretty simple actually. PM me if you got any problems.
 

·
Registered
Joined
·
1,923 Posts
The live wire on a Dimarzio is RED. However, to get the coil tap you need to join the black and the white wires together and also solder them onto the switch. The Green and bare wires goto ground. From the toggle switch there should ONLY be two wires. One going to ground and another going to your volume. Your volume consequently should only have one wire going out and that goes to your output jack.

If you have any problems feel free to bug me.

Cheers,

Budd

Progdude said:
what colors of the wires should be soldered to the toggle and what colors to the output and volume?

Thanks
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top