Hello ive been planning to swirl my guitar for a while. i removed the old finish and have prepared the body to its fullest. can someone give me some feedback on my process? i have used test pieces of wood that were primed with white. And i noticed that the humbrol enamel was too think (especially for the white, most of it just sank to to bottom) i plan to thin out the paint and try again. also on some of the pieces the paint started to drip and smear almost as soon as i took it out. what can i do to avoid this? how long do i have to let the paint set before i add clear coat. i will be using 2k automotive clear coat. if anybody has any suggestions or thinks i should be using other paints please let me know what kind thank you.