[Timanator]

Try to get an idea on how you guys see your Ibanez's as would/couldave optioned from Ibanez.


Edited (Gabriel has now modded it even more...)

 

[rl^^]

i dont know if it applies but here is mine, just fretboard and inlay work

jeremy rocks huh

http://www.jemsite.com/phpbb/viewtopic.php?t=25474

mine is the uv on the left

 

[toshiro]

Well, since they cut off my hot-linking services, I can put a link to a page with the guitars on it.

Here ya go: http://www.marua.com/toshiro/myguitars.htm

 

[MehYam]

Kick-ass job on the RG. I like the black strat knobs. Kinda retro, kinda not.

 

[nuno]

Toshiro,
do you bend your tremolo arms? they look like Floyd style arms, not as straight as an Edge tremolo arm.

 

[toshiro]

Heh, those *ARE* Schaller floyd trem arms!

I stick 'em on all my guitars, cuz it's easier to get new ones, they're shorter(tip is right over the neck pickup), and they stay put better than an Edge bar.. No nail-polish or tons of plastic rings, just torque the thumbscrew and it stays in one place forever.

 

[dot-dot-dot]

My RG570 - now with an internal GK-2 hex pickup, respray to matte grey, Seymour Duncan '59s and a Sustainiac Stealth:

And the insides:

And here's my Talman; new scratchplate, Kent Armstrong PAF in the bridge, fancy switching (phase for the middle pickup, split/series/parallel for the humbucker, but that's about to change again):

 

[the.godfather]

Very nice guitar dude - gotta love that Matt finish!

 

[darren wilson]

Wow. That is a CRAPLOAD of wiring in that 570! Nice Swiss-Army-knife of a guitar, though!

I must get around to finishing my 540R project.

 

[gkelm]

Hey dot-dot-dot, that RG is quite a beast (like the Tlamn as well). Did you do all that wiring yourself? I've been toying with the idea of that RG420 with the GK-2 built-in, but can't seem to find one reasonably priced. Was it difficult?
Greg

 

[dot-dot-dot]

I did the Talman, but the RG was done by Barrie at Machinehead - far too much routing for me to dare have a go! The work wasn't cheap, but it's superbly done.

 

[Jem7RB MK]

Sweet guitars guys,I sharnt bother listing mine,Just do a search for DPV and MBK ;-)

Later

Rob

 

[Artist]

that matte finish is the only finish i've ever seen that makes me wanna strip my jem (tho i wont).

but might consider doing set of work based around my old S body. new neck.... finish.... hardware.... pups...

 

[WillTubarao]

This is my babies! (AND THIS FAT GUY IS ME, OF COURSE!!!!!)
More Hi-Res pics here:
http://www.jemsite.com/phpbb/viewtopic.php?t=24458&highlight=
C-YA,
Tubarão Guitars

 

[horstausmforst]

Do viper stripes count?

 

[Timanator]

Very nice.

I'm looking for inspiration for my new project.

 

[jwai]

hi guys, here's my Ibanez RG570 in a all purple job. all purple dimarzio pickups and purple knobs sets too! check it out.

http://community.webshots.com/photo/91859359/91860373QhdeMh

http://community.webshots.com/photo/91859359/91860535BfzxLF

by the way, can't seemed to upload the pic using the BBcde Img tag. anyone can help me with it? i've got them in webshot community.

 

[the.godfather]

Hey that all purple 570 looks ace my friend - well done.
I may even consider that for a future project!

 

[Ibanezer]

8O !! the purple 570 looks killer!
I think I might do something to my 520QS too...
after looking at the purple 570 I have some ideas in my head...
hey thanks jwai! good job!
-Sam-

 

[jwai]

THANKS guys!! i never really know people will come to appreciate it, i thought it looked too "purplish". i actually intended to make it to a ll purple JEM modification and have LGM guitars to do either a purple dot inlays or purple vine-inlays but, i'm just short of cash now. i'm extremely satisfied with it now. thanks guys for the comments!! it definitely made me excited to further modify my other guitars!!! THANKS :wink: