I am installing a new DiMarzio S.D. bridge into my RG 570 Genesis to replace the stock V8. After following some random internet guys advice and having it turn out sounding like I obviously wired it wrong, I looked up wiring diagrams on DiMarzio and the closest they had was the RG 1570, so I followed that. Now the bridge humbucker sounds right, but the 2nd position of the 5way where it taps the bridge and adds it to the single coil sounds like a tin can. Anyone able to share an experience where you figured out which wires to swap to make this right? NEVER MIND there's a hundred posts about this already plus I figured it out.