Ibanez JEM Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi everybody,

Any hints?

The volumepoti of my rg2550 is so tight to work with, that I can't use all this 'fade-in' effects. I really have to put hand on to turn volume down for e.g.

I already took a closer look at it.. couldn't solve the prob.

Best regards
Marq
 

·
Registered
Joined
·
1,923 Posts
Sounds like you have too much crud built up in your volume pot. Try cleaning it, but if it doesn't work just replace the volume pot. Eventually pots accumulate so much crud that it's almost shot.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #6 ·
Algiman said:
No harder than taking the scratch plate off and squirting it through the holes in the back of the pot. If it is faulty you'll have to pull the guitar apart to replace it anyway.
Ok, I'll try the contact spray as recommended and if it fails I'll replace it!

Thank you!
Marq
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top