Ibanez JEM Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
And I don't mean a tremsetter or tremol-no. I've heard of people using erasers, but the edge pro on my RG2550 leans forward a bit when I use them. Anyone know of any objects that would do the trick?
 

·
Registered
Joined
·
4,725 Posts
the EdgePro is a bit tricky to block if you want to do it properly (i.e. blocking it right on the very outer edge of the block, where the springs attach). that's the way i usually do it:

(dive-only - it's a LoPro, but pretty much the same on EdgePro)



(full-block)



 

·
Registered
Joined
·
1,056 Posts
i blocked an edge on my rg570 with a stack of coins taped up on one side and a few pieces of ice cream sticks stuck together on the other side. works fine.

i'd be careful about drilling holes in the guitar though.
 

·
Registered
Joined
·
56 Posts
the EdgePro is a bit tricky to block if you want to do it properly (i.e. blocking it right on the very outer edge of the block, where the springs attach). that's the way i usually do it:

(dive-only - it's a LoPro, but pretty much the same on EdgePro)



(full-block)



Get a hardtail!
 
1 - 16 of 16 Posts
Top