http://www.dimarzio.com//media/diagrams/C.pdf

the only difference is you need a 5 way multi switch, not a regular 5 way switch and follow the same diagram, but in the 3 positions bridge over the middle section bot ground and both hots of the mid pup

 

thanks mate, but that doesn't answer my question at all. I have looked at that, and tried to figure out how that coincides with a superswitch. brain melt.

 

with a little jiggery pokery, this one should do it.
should give you an idea how the 4 pole switch works anyway - it basically has no internal jumpers/switching, you do that yourself.

 

bravo jaden

 

Have a look at:
http://www.jemsite.com/forums/showthread.php?t=70976
post #2 I think that should cover what you want.
The diagram is for the Ibanez VLX91 switch, the super switch is the same but the layout is slighty different, the solder tags are round the circumference instead of at the sides, but, otherwise it's the same!
Jim

(Damn, somebody beat me to it!, and it's the same as my solution, curses!)

 

I also am interested in this cuestion about HHH diagram for my project.

I take note...

thanks!

 

Thanks Jaden and Vim.

(If I do a search, I find myself asking the same question years ago...)

 

My lord, soldering these connections is driving me bananas... long wires, short wires...

Wonder if I should just wait for my Breed set from microdimitry.

Starting to miss a pickguard

 

Finally completed wiring this today. It doesn't look neat at all, but all pickups work as intended. Could have a grounding issue since if I let go of the metal parts, I get hum/buzz

I really like the protrack in the middle. It compliments the TZ (B) and PAFPRO I have quite well. Especially like the split coil tones. It is surprisingly louder than the JB Jr I used to have in there. I am surprised that it sounds so much like a humbucker as opposed to the single-coily sound of the JB Jr. The Protrack isn't very quacky.

Going to play around with it more. If anyone has questions, let me know.

Guitar is an RG570EX (basswood)

 

Damnit, now that I've covered the control cavity, I've noticed that all coils (all 6) are sometimes on. Probably because some wires are touching each other now that they're all pressed into each other.

Rhymes with Duck, this...

 

Finally works out.... Still waiting for my new pups from Dmitriy, but that'll come.

Next question, can I replace my tone pot to be a pushpull, with the result that pos 1, 3 and 5 are tapped (bridge, mid, neck)?

 

If you connect the coil tap leads that go the the 5 way to the push pull pot as well, and the other side of the push pull pot to earth, that'll do what you want.
Jim

 

Thanks Vim

I know I should search, but since I have your eyes ....

Can you let me know, 2K, 250K, 500K tone pot? Do I need to get any caps as well?

Thanks

 

The Ibanez Jem (according to the wiring diagram) uses a 0.022uF capacitor and a 500k log (audio) pot.
Jim

 

OK thanks Jim.